Drives and motion accelerator toolkit wizard

Rockwell's DMAT now has a system development wizard designed to simplify the machine-design process and guides users through a step-by-step process that includes input about machine requirements and CAD drawings.


Rockwell's DMAT now has a system development wizard designed to simplify the machine-design process and guides users through a step-by-step process that includes input about machine requirements and CAD drawings. Courtesy: Rockwell AutomationRockwell Automation has launched a system development wizard for its Drives and Motion Accelerator Toolkit (DMAT) that simplifies the machine-design process. In fact, the wizard has the ability to save OEMs up to 90 percent of the time required to select, configure and troubleshoot an integrated drives and motion control solution. 

The DMAT wizard guides users through each step of selecting and programming a drives and motion solution. The proactive interface prompts users for input with questions about their machine requirements, such axes of motion, torque and speed. Based on the users responses, the software presents them with a choice of motor and drive combinations for a variety of load, transmission, and application types. Once the user selects preferred components, the DMAT will produce a bill of materials. 

The toolkit also provides a beginning set of CAD drawings, wiring diagrams, panel layouts, and automatically pulls proven code from the DMAT library into a project file so users have preconfigured controller, network, drives and initial system program logic. The toolkit will also provide a custom set of instructions to quickly adapt a starting HMI application. 

Eliminating much of the time associated with routine tasks in drives and motion system design can reduce overhead costs and speed time to market. The system development wizard makes drives and motion system design simple enough that engineers with less experience in drives and motion system design or programming can successfully design a system and produce the initial logic and HMI application. 

Finally, DMAT will also run diagnostic tests to troubleshoot potential problems with the system and provide suggestions on how to fix any issues found, all before physical prototyping begins.

Rockwell Automation 

See other motor and drive hardware and software from Control Engineering.

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me