Does the European market for data center power distribution products have untapped potential?

Data center power distribution in Europe accounts for a very small amount of the $440 million accumulated in 2011. The potential for a growing market exists, but a lack of visibility and investment remains a hurdle.

05/21/2012


With an estimated size of around $50 million in 2011, EMEA’s market for three-phase data center power distribution hardware was smaller even than that of Asia’s developing markets. A new study by IMS Research, recently acquired by IHS Inc., shows that the global data center power distribution market was worth $440 million in 2011; the Europe, the Middle East and Africa (EMEA) market accounted for only 11% of this, with most revenues coming from the Middle East. However, because EMEA’s markets for both data centers and uninterruptable power supplies (UPS) are of similar size to those in the Americas, it is possible that EMEA is merely an untapped potential waiting to become the next $100 million dollar market by 2016 for these types of specialty power distribution products.

The study considered product hardware for the three-phase power distribution market including transformer-based power distribution units (PDU), remote power panels (RPP), static transfer switches (STS), overhead busway, and branch circuit monitoring (BCM). With a high price tag, commanding upwards of $30,000 for just one unit, transformer-based PDUs make up 37% of hardware revenues. As most of EMEA, with the exception of the Middle East, uses 400/230 Vac distribution, the need for the step-down voltage transformation provided by PDUs is unnecessary; this eliminates the potential for upwards of $100 million in revenues from PDUs in EMEA.

“The lack of need for a step-down transformer is just one of the reasons for the difference in size between the American and EMEA markets,” says IMS Research market analyst Lori Lewis. “Instead of using expensive hardware such as PDUs and RPPs, the market has been satisfied by local panel builders using generic equipment to build low cost wall panels.”

Furthermore, limited visibility and product knowledge of the more relevant equipment, such as overhead busway, have delayed significant sales in EMEA. Overhead busway offers the benefits of bringing circuit breakers closer to the loads without consuming floor space while also allowing for much more flexible reconfigurations in the ever-changing data center environment. “Because this product was developed as an alternative to the transformer-based PDU, most manufacturers of overhead busways and their installed user base are in the US. Therefore, the market for overhead busway has yet to establish itself in EMEA,” explains Lewis. “Should more companies begin to showcase busway products in EMEA data centers, the more likely these products will catch on in the region.”

Universal Electric has been selling its Starline track busway product into European data centers through European resellers for a few years now. More recently, Power Distribution, Inc. signed an international licensing deal with UK-based Mardix to sell PDI’s overhead busway line in EMEA. Such expanded marketing is what is needed to bring three-phase power distribution products into EMEA data centers and create product awareness in equipment such as branch circuit monitoring and overhead busway. “We feel that there is a market for these products in EMEA, but until more suppliers begin exploring these opportunities for growth, it is likely to take longer than five years before EMEA hits the $100 million dollar mark.”



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2015 Top Plant: Phoenix Contact, Middletown, Pa.; 2015 Best Practices: Automation, Electrical Safety, Electrical Systems, Pneumatics, Material Handling, Mechanical Systems
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Migrating industrial networks; Tracking HMI advances; Making the right automation changes
Understanding transfer switch operation; Coordinating protective devices; Analyzing NEC 2014 changes; Cooling data centers
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.