Distributed IO can reduce arc flash hazards

Causing thousands of injuries every year, arc flash is a serious and even deadly hazard, which makes selecting the right safety solution critical.

11/10/2012


Courtesy: TURCKIndustries are becoming more communication-centric, requiring dependable enterprise connectivity to collect and distribute production data. Consequently, protecting control equipment is critical. Consequently, electrical enclosures are an essential part of any installation. While enclosures do protect against exposure to the elements, they can also present a serious arc flash hazard, as accessing energized distributed I/O equipment housed inside the enclosure poses the threat of an arc flash—an explosive blast of flame, debris, sound, and force—every time the enclosure is opened.

An arc flash can occur anywhere in an electrical system and is caused by a phase-to-phase fault or when the electrical service is provided a low impedance path to ground, or phase-to-ground fault—the severity of which is determined by the distance from the arc and the amount of energy available. This blast usually lasts under one second but can reach up to 35,000 F, which can result in severe burns to human skin. Additionally, the arc flash blast can propel molten metal, shrapnel, and tools through the air, causing a serious risk to facility personnel and occupants.

The gravity of this danger requires plant managers to be proactive in selecting the ideal safety solution that protects employees without impeding productivity or equipment accessibility. Therefore, when it comes to safeguarding against arc flash hazards, plant managers need to think outside the box to prevent injuries while increasing visibility over control equipment and improving productivity. While solutions exist that can reduce the risk of injury when accessing controls, distributed I/O mounted outside the enclosure ensures continued, reliable connectivity without putting employees in harm’s way. 

Safety outside the box

While no solution can completely eliminate the risk of arc flash hazards, there are solutions that minimize engineers’, technicians’, and maintenance workers’ exposure to such risks. Since there is a potential for an arc flash occurrence every time the electrical enclosure is opened, being able to take distributed I/O equipment out of the electrical enclosure, which may contain live voltage with sufficient energy for an arc flash event, and mount it in the field, minimizes risk exposure and ensures continued connectivity. 

Further, engineers and maintenance workers often require frequent access to distributed I/O equipment and controls to maintain continued production, so using an efficient, safe method for personnel interaction is crucial. Mounting equipment and controls outside the electrical enclosure provides engineers with easy and immediate access to it without opening the enclosure. This not only ensures the same level of connectivity and communication, but also enhances operator safety.

For additional communication flexibility, distributed I/O products are engineered for durability, allowing installation in a wide range of demanding plant environments. Featuring IP ratings, such as IP65, IP67, IP68 and IP69K, these products can reliably perform in dusty, wet, and harsh environments without risk of element ingress. Some distributed I/O solutions can even withstand heavy washdown conditions and total submersion.

This inherent durability allows distributed I/O products to be effectively removed from the electrical enclosure and exposed to the application environment without malfunctioning, causing network faults, service interruptions, or arc flash ignition. 

Conclusion 

Causing thousands of injuries every year, arc flash is a serious and even deadly hazard, which makes selecting the right safety solution critical. Distributed I/O not only provides high-level visibility of production data and enterprise connectivity with in-the-field convenience, it also simultaneously reduces the risk of arc flash ignition and improves process efficiency. 

Randy Durick is director of the network and interface division of TURCK.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Hannover Messe 2016: Taking hold of the future - Partner Country status spotlights U.S. manufacturing; Honoring manufacturing excellence: The 2015 Product of the Year Winners
Inside IIoT: How technology, strategy can improve your operation; Dry media or web scrubber?; Six steps to design a PM program
World-class manufacturing: A recipe for success: Finding the right mix for a salad dressing line; 2015 Salary Survey: Manufacturing slump dims enthusiasm
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Digital oilfields: Integrated HMI/SCADA systems enable smarter data acquisition; Real-world impact of simulation; Electric actuator technology prospers in production fields
Special report: U.S. natural gas; LNG transport technologies evolve to meet market demand; Understanding new methane regulations; Predictive maintenance for gas pipeline compressors
Warehouse winter comfort: The HTHV solution; Cooling with natural gas; Plastics industry booming
Managing automation upgrades, retrofits; Making technical, business sense; Ensuring network cyber security
Designing generator systems; Using online commissioning tools; Selective coordination best practices

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
click me