Data center temperature specs change

Walking into an ice-cold data center is slowly becoming a thing of the past, with the days of 68 F computing facilities receding further into history.


ASHRAE Data Center will soon release the third edition of its Thermal Guidelines specifications, which since 2004 has created the de facto global standard for allowable temperatures within data centers, as well as how to measure those temperatures. 

The second edition of the standard set as the optimal temperature 80.6 F for data center operations. The third edition is expected to further raise that thermostat, although ASHRAE has not yet announced what the new recommended temperature will be.

The standard is created by Technical Committee 9.9, for Mission Critical Facilities. The committee first made waves in the IT industry when it published the book on data center heating and cooling in 2004; prior to that point, individual manufacturers set their own acceptable temperature ranges.

Raising the thermostat in data centers allows companies to cut tens if not hundreds of thousands of dollars off their energy costs every year, and reduces the carbon footprint of the data center at the same time. The most widely quoted estimate is that data centers contribute about 2% of the world's greenhouse gas emissions, although that figure is now several years old and likely underestimates the rapid rise in demand for IT around the world.

ASHRAE's TC 9.9 consists of engineers from IT manufacturing companies, and all of those firms are already working on addressing energy use in the data center. In an article looking at the new standards, Data Center Knowledge's John Rath writes:

But some in the data center industry say ASHRAE will simply be acknowledging advances that are already taking place in some of the largest working data centers. "Most companies in the cloud business are already procuring servers that operate well outside of the ASHRAE specs to allow for aggressive economization to drive much greater efficiencies then what is achievable using the ASHRAE specs," said Christian Belady, the General Manager of Data Center Research at Microsoft Global Foundation Services "My guess is that they realize now that they are no longer driving the industry environmentals, and are now going to broaden to what the cloud providers have already made as the de facto standard."

Belady was among those who encouraged ASHRAE to adopt a more aggressive revision of data center operating temperatures. "At the time I was arguing that (ASHRAE) should be leading the industry and drive vendors to broaden operating ranges well beyond what they ultimately published in 2009 so that the industry can aggressively adopt economization," Belady said, adding that ASHRAE "elected to be conservative."

More details about the new standard are available from ASHRAE.

- Edited by Gust Gianos, Consulting-Specifying Engineer,

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me