Crystalline PV module profits fall to single digits

Average gross profits of crystalline photovoltaic (PV) industry module manufacturers fell to just nine U.S. cents per watt in the first quarter of 2012.

06/26/2012


Average gross profits of crystalline photovoltaic (PV) industry module manufacturers fell to just nine U.S. cents per watt in the first quarter of 2012, putting huge pressure on suppliers according to the latest quarterly report from IMS Research, recently acquired by IHS Inc. As a result of continued price pressure and highly competitive market conditions throughout the PV industry, gross profits are forecast to continue to fall further to just seven cents per watt by the end of 2012.

The latest report from IMS Research revealed that following a year of rapid price declines, when average crystalline PV module prices fell by nearly 50%, industry gross profits fell below $500 million in Q1’12, the lowest level since 2008 and more than 75% lower year-on-year. The cause of this rapid deterioration is simply due to costs not falling as quickly as prices. Whilst average crystalline PV module prices fell by $0.67/watt in 2011, average costs per watt reduced by just $0.42.

“Profit margins have been the victim as suppliers have been forced to engage in a fierce price war and have reduced prices faster than they have been able to reduce their costs,” commented senior market analyst Sam Wilkinson. “High inventory levels, weak demand and reduced government support for PV have all contributed to a rapid downward spiral for PV module prices.”  

The narrowing gap between prices and costs has resulted in the average gross profit per watt of crystalline modules falling from $0.39 to just $0.09 in one year. One key reason that suppliers have been unable to reduce their costs quickly enough is that average polysilicon prices have not declined as quickly as module prices.

“Although spot prices for polysilicon have quickly fallen over the last year, a large proportion of polysilicon is purchased under long-term agreements, and it has taken some time for suppliers to cancel or renegotiate supply contracts in order to reflect these reductions in spot prices. If we consider this mix of spot and contract prices, on average polysilicon prices fell far less than modules in 2011,” added Wilkinson.

Gross margins are forecast to stabilize at nine percent on average in the second half of 2012, with further price declines offset by significant improvements in non-silicon processing costs and continued declines in blended silicon purchase prices, which are projected to reach $25/kg in Q3’12.

Detailed analysis of supply and demand dynamics in this market is available from IMS Research’s latest quarterly report on the industry.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me