Construction activity improves in Q1

FMI's newest Nonresidential Construction Index (NRCI) increased 7.8 points to 58.1, indicating the construction industry is slowly improving along with the rest of the economy.

02/24/2012


FMI has announced the release of its Nonresidential Construction Index (NRCI) report for the first quarter of 2012.

The NRCI gained 7.8 points over last quarter to 58.1 this quarter. This positive move to start the new year is not exactly the sign of a bull market for construction, but continuing confirmation that panelists believe that the construction activity is following the lead of the slowly improving economy. There are good signs in hiring plans for 2012, as well as construction-put-in-place predictions. However, panelists indicate that low project pricing and high competition are still driving the market place.

  • Hiring: A five percentage points increase over this time last year, 42%of panelists indicated a 0% to 5% increase in full-time direct employees. Additionally, fewer panelists indicated a reduction in salaried employees.
  • Construction Put In Place: Expectations for CPIP are positive but cautious, as 41.3% of panelists expect growth of 0.5% to 2.5% for 2012.
  • Overall Economy: The component for the overall economy showed the strongest improvement of all index components with a jump from 43.6 last quarter to 68.7 in the first quarter, a 25 point gain. This score reflects the improvement in many economic indicators including the unemployment rate.
  • Nonresidential Building Construction Market Where Panelists Do Business: At just 54.9, the local markets for nonresidential construction are inching ahead. However, panelist responses reflect a perception that their own business is performing a bit better than the overall nonresidential construction market. This indicates that local markets are still very competitive.
  • Cost of Materials: Despite a slow economy, material costs continue to rise, with no panelists indicating material costs were lower than last quarter. The cost of materials component moved down nearly 5 points to 26.2. This factor is continuing drag on the overall index and is likely to raise the cost of projects while lowering profit margins for contractors.
  • Cost of Labor: The cost of labor improved just slightly to 41.5, indicating little change over the score of 40.0 last quarter. However, no panelists indicated they were experiencing lower labor costs.
  • Productivity: Contractors are continuing to make moderate gains in productivity. However, at 52.9, this component is still too weak to offset rising costs for labor and materials.

- Edited by Chris Vavra, Consulting-Specifying Engineer, www.csemag.com 



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me