Compact embedded PC can serve as PLC, motion controller

The CX9020 Embedded PC by Beckhoff Automation features a 1 GHz ARM Cortex A8 processor and can become a PLC and motion controller with automation software.

05/29/2013


The CX9020 Embedded PC by Beckhoff Automation features a 1 GHz ARM Cortex A8 processor and can become a PLC and motion controller with automation software. Courtesy: Beckhoff AutomationThe CX9020 Embedded PC by Beckhoff Automation is DIN rail mounted and equipped with a powerful 1 GHz ARM Cortex A8 processor. The CX9020 is suitable for a wide range of PLC and motion control applications in small and medium sized machines, systems or buildings.

The CX9020 integrates a CPU, numerous connectivity solutions and optional interfaces, a power supply and a direct I/O interface for Beckhoff I/O systems, all in one compact housing. The CX9020 can operate in demanding environments with temperatures ranging between -25 to +60 °C making it ideal for a wide range of manufacturing facility types and outdoor applications, including wind turbines and solar power installations.

In combination with the TwinCAT automation software platform from Beckhoff, the CX9020 becomes a dependable PLC and motion controller that can be used with or without visualization.

The solid-state CX9020 is fanless and equipped with two microSD card slots providing the option for larger storage capacity on the device. It also comes with a 256 MB microSD card for the operating system; the supplemental microSD card slot can be used for additional operator data. The CPU inside the CX9020 has access to an impressive 1 GB of internal DDR3 RAM memory. In addition, 128 Kbyte of NOVRAM are available for data storage in the event of a power failure.

The basic configuration of the CX9020 includes two switched Ethernet 10/100 Mbit/s RJ 45 interfaces, four USB-2.0 interfaces and a DVI-D interface. The RJ 45 interfaces are connected to an internal switch and offer a simple option for creating a line topology without the need for additional Ethernet switches. A “multi-optional” interface permits the integration of an additional interface, such as EtherCAT (slave only), Profinet, EtherNet/IP, Profibus, CANopen, DeviceNet, serial interface (RS232/RS422/RS485) or audio.

Another smart feature of the CX9020 is its ability to automatically detect the directly-connected Bus Terminal I/O or EtherCAT Terminal I/O and switch to the respective mode for convenient system management.

Beckhoff Automation

www.beckhoff.com 

See other Control Engineering controller products.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Prescriptive maintenance; Hannover Messe 2017 recap; Reduce welding errors
Safety standards and electrical test instruments; Product of the Year winners; Easy and safe electrical design
Safer human-robot collaboration; 2017 Maintenance Survey; Digital Training; Converting your lighting system
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
Automation modernization; Predictive analytics enable open connectivity; System integration success; Automation turns home brewer into brew house
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems
Natural gas for tomorrow's fleets; Colleges and universities moving to CHP; Power and steam and frozen foods

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
Compressed air plays a vital role in most manufacturing plants, and availability of compressed air is crucial to a wide variety of operations.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me