CMOS based x-ray panels for fluoroscopy, dental imaging
DALSA’s Xineos-1313 strives to be the next generation in CMOS Flat Panel for Fluoroscopy and Cone Beam CT Dental Imaging.
Dalsa Corporation [TSX: DSA], a global leader in digital image sensing technology, produces the first in a family of dynamic CMOS X-ray detector panels. The new Xineos purportedly represents the industry’s first standard CMOS flat-panel detector to deliver high speed, low dose imaging without compromises in resolution.
Dalsa said it developed Xineos to deliver better sensitivity and signal-to-noise performance compared to other standard technologies at equal X-ray dose conditions. CMOS image detectors offer numerous advantages including ability to record faint image details at higher resolutions – allowing for the diagnostics of medical anomalies at earlier stages, and significantly increasing the probability of early intervention, patient recovery, and reduced treatment costs.
“With the introduction of Dalsa’s Xineos line of digital imaging X-ray panels, we are leveraging our CMOS technology to maximize the signal and minimize sources of noise in X-ray imaging,” stated Bryan Delodder, Xineos product manager at Dalsa. “In low dose conditions where competing products fail to distinguish faint signals due to noise, our advanced CMOS detectors excel to deliver the clearest images possible.”
In dental applications, the Xineos-1313-EO is designed to operate at full resolution for both frame-based panoramic imaging, at frame rates exceeding 300 fps, as well as for Medium Field of View (MFOV) Cone Beam CT applications at 30 fps. An optional “Sequence Memory” enables storing an entire CBCT image sequence inside the detector, allegedly eliminating the need for rescans due to data acquisition loss during the actual CBCT scanning procedure.
In medical applications, the Xineos-1313-FL is optimized for fluoroscopic imaging, purportedly offering the highest X-ray sensitivity combined with lowest readout noise. Xineos enables real-time imaging for cardiac, vascular, orthopedic as well as other minimally-invasive procedures that depend on real-time imaging, with minimum patient dose.
Gigabit Ethernet, simplifies connectivity, operation, company said
Xineos products are equipped with Dalsa's hardware and software implementation of the industry standard GigE Vision data interface. Xineos can reportedly connect almost any computer within minutes to produce low-noise, real-time, high resolution X-ray images.
www.dalsa.com Dalsa Corporation
- Events & Awards
- Magazine Archives
- Oil & Gas Engineering
- Salary Survey
- Digital Reports
- Survey Prize Winners
Annual Salary Survey
Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.
There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.
But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.
Read more: 2015 Salary Survey