Best practices for steam trap installation

A steam trap has two major functions, to remove condensate as quickly as it forms, and to prevent steam discharge. There are certain installation faults, which negatively affect the ability for traps to perform these functions efficiently.

05/11/2011


A steam trap has two major functions, to remove condensate as quickly as it forms, and to prevent steam discharge. There are certain installation faults, which negatively affect the ability for traps to perform these functions efficiently.

A high percentage of steam trap failures are simply due to incorrect installation. Proper installation should provide six years of maintenance-free operation. Outlined below are Best Practices for steam trap installations, to help maximize system operation:

  1. The most important rule to remember for steam trap installation is GRAVITY. Condensate must flow from the process to the steam trap by the forces of gravity. Pressure and velocity cannot be relied on to remove the condensate from the process.
  2. Determine the steam leak rate of any new steam traps purchased, per the following leak rate standards:

    1. PTC-39
    2. ISO 7841

  3. All steam traps leak a quantifiable amount of steam and the consumer should be specifying steam traps with the least amount of steam loss to prevent unnecessary energy loss.
  4. Steam traps with 1 in. or smaller connections should use tubing with tube connectors to eliminate leak points such as threaded connections. Threaded connections are obvious sources of leaks in the system due to expansion, contraction, and corrosion that occurs in a steam system.
  5. Some steam component manufacturers have tube connections available for steam trap installations. Ensure material pressure ratings are acceptable. 
  6. Never reduce diameter of the tubing/piping before the steam trap, or reduce connec­tion size of the steam trap. Piping from the process to the steam trap should always be equal to or larger than the process outlet connection. For example, a steam unit heater with a 1 in. condensate outlet would require a 1 in. or larger tubing/piping from the unit heater to a same connection size on the steam trap.
  7. Expand the tube/pipe diameter after the discharge connection of the steam trap. For example, a 1 in. steam trap discharge should connect into tubing/piping with an expanded diameter of 1.25 in. or 1.5 in.
  8. Connect steam traps with connection sizes of 1 in. or smaller to the tubing or piping with universal mounts. The universal mount provides the ability to connect the steam trap to the application with two bolts, thus dramatically reducing installation time.
  9. Install a strainer to help eliminate or reduce premature failure due to corrosion. There are three main choices for strainer installation:

    • Installation of an external strainer ahead of the steam trap
    • Installation of a steam trap with integral strainer
    • Installation of a universal mount with an integral strainer

      • When installing an external or internal strainer; always install a blow-off valve on the strainer. This allows the strainer to be blown down during operation and, more importantly, permits the steam trap cavity to be safely depressurized during servicing.

  10. Always install the steam trap in a location that is accessible by plant per­sonnel.
  11. Install a visual indication of the steam trap performance on all process ap­plications. The visual indication can be a sight glass or test valve.
  12. Locate the steam trap below the lowest condensate discharge point of the equipment.
  13. Never install a rise in the pipe ahead of a steam trap.
  14. Check valves should be installed after the steam traps in most applications.
  15. Develop and maintain installation standards for all applications.
  16. Codes:

    • Material test reports on all components (steam traps, connection devices, etc.)
    • B31.1 Piping code

For more information, visit www.swagelokenergy.com.


The above material is part of Swagelok Energy Advisors' series of Best Practice papers, authored by Kelly Paffel. Kelly is a recognized authority in steam and condensate systems. He is a frequent lecturer and instructor on the technical aspects of steam systems. In addition, Kelly has published many papers on the topics of steam system design and operation. Over the past 30 years, he has conducted thousands of steam system audits and training sessions in the United States and overseas, which has made Kelly an expert in trouble-shooting actual and potential problems in the utilities of steam. Kelly is a member of the U.S. Department of Energy’s (DOE) Steam Best Practices and Steam Training Committees.



The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
Each year, a panel of Control Engineering and Plant Engineering editors and industry expert judges select the System Integrator of the Year Award winners in three categories.
A new approach to the Skills Gap; Community colleges may hold the key for manufacturing; 2017 Engineering Leaders Under 40
Doubling down on digital manufacturing; Data driving predictive maintenance; Electric motors and generators; Rewarding operational improvement
2017 Lubrication Guide; Software tools; Microgrids and energy strategies; Use robots effectively
The cloud, mobility, and remote operations; SCADA and contextual mobility; Custom UPS empowering a secure pipeline
Infrastructure for natural gas expansion; Artificial lift methods; Disruptive technology and fugitive gas emissions
Mobility as the means to offshore innovation; Preventing another Deepwater Horizon; ROVs as subsea robots; SCADA and the radio spectrum
Power system design for high-performance buildings; mitigating arc flash hazards
Research team developing Tesla coil designs; Implementing wireless process sensing
Commissioning electrical systems; Designing emergency and standby generator systems; Paralleling switchgear generator systems

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
The maintenance journey has been a long, slow trek for most manufacturers and has gone from preventive maintenance to predictive maintenance.
Featured articles highlight technologies that enable the Industrial Internet of Things, IIoT-related products and strategies to get data more easily to the user.
This digital report will explore several aspects of how IIoT will transform manufacturing in the coming years.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
This course focuses on climate analysis, appropriateness of cooling system selection, and combining cooling systems.
This course will help identify and reveal electrical hazards and identify the solutions to implementing and maintaining a safe work environment.
This course explains how maintaining power and communication systems through emergency power-generation systems is critical.
click me