Artificial intelligence tools can aid sensor systems


References for Control Engineering article: Artificial intelligence tools can aid sensor systems

[1] Sanders DA and Gegocv A (2012). Review of some artificial intelligence tools for use in Assembly Automation and some examples of recent applications. Assembly Automation In press.

[2] Pham D.T and Pham PTN (1999). Artificial intelligence in engineering. International Journal of Machine Tools and Manufacture, Vol 39, Iss: 6, June 1999, Pages 937-949.

[3] Pham D.T and Pham PTN (1988). Expert systems in mechanical and manufacturing Assembly Automation. Int. J. Adv. Manuf. Technol. 3 (1988), pp. 3-21.

[4] Sanders D (1999). Perception in robotics. Industrial Robot: An International Journal; Vol: 26 (2), pp 90-91.

[5] Sanders D (2009). Introducing AI into MEMS can lead us to brain-computer interfaces and super-human intelligence. ASSEMBLY AUTOMATION, Vol 29, Iss: 4, pp: 309-312.

[6] Sanders (2008). Progress in Machine Intelligence. Industrial Robot – An International Journal 35 (6), Pages: 485-487.

[7] Sanders DA, Haynes BP, Tewkesbury GE, et al. (1996). The addition of neural networks to the inner feedback path in order to improve on the use of pre-trained feed forward estimators. Mathematics and computers in simulation 41 (5-6), pp 461-472.

[8] Hudson AD, Sanders DA, Golding H, et al. (1997). Aspects of an expert design system for the wastewater treatment industry. Jnl of Systems Architecture 43 (1-5): 59-65.

[9] Tewkesbury G, Sanders D (1999). A new simulation based robot command library applied to three robots. Journal of robotic systems 16 (8), pp 461-469.

[10] Burn K, Home G (2008). Environment classification using Kohonen self-organizing maps. Expert Systems 25 (2), pp 98-114.

[11] Zoumponos GT, Aspragathos NA (2008). Fuzzy logic path planning for the robotic placement of fabrics on a work table. Robotics and computer-integrated manufacturing 24 (2), pp 174-186.

[12] Manikas TW, Ashenayi K, Wainwright RL (2007). Genetic algorithms for autonomous robot navigation IEEE Instrumentation & Measurement, Vol: 10 (6), pp 26-31.

[13] Rajamani S and Sayre R (2011). FRET-Based Biosensors for the Detection and Quantification of AI-2 Class of Quorum Sensing Compounds. Editor: Rumbaugh KP. Quorum Sensing: Methods and Protocols. Book Series “Methods in Molecular Biology,” Volume 692, pp: 31-46 {DOI: 10.1007/978-1-60761-971-0_3}.

[14] Guru SM, Fernando S, Halgamuge S and Chan K (2004). Intelligent fastening with A-BOLT technology and sensor networks. Assembly Automation 24 (4), pp 386 – 393.

[15] Bustillo A; Sedano J; Ramon Villar J; et al. (2008). AI for Modelling the Laser Milling of Copper Components. Editors: Fyfe C; Kim D; Lee SY et al. Proceedings of the 9th International Conference on Intelligent Data Engineering and Automated Learn Location: Daejeon, SOUTH KOREA (November 2008). Book Series “Lecture Notes in Computer Science,” Volume 5326, pp: 498-507.

[16] Gegov, A (2004). Application of computational intelligence methods for intelligent modelling of buildings. Applications and science in soft computing ISSN: 1615-3871 (Advances in soft computing ISBN: 3-540-40856-8 Editors: Loffi A, Garobaldi J), Springer-Verlag, Berlin, pp 263-270.

[17] Sanders DA (2009b). Recognizing shipbuilding parts using artificial neural networks and Fourier descriptors. Proc. IMechE, Part B: J. Engineering Manufacture, 2009, 223(B3), 337–342.

[18] Sanders DA and Hudson AD (2000). A specific blackboard expert system to simulate and automate the design of high recirculation airlift reactors. Mathematics & Computers in simulation 53 (1-2), pp 41-65

[19] Sanders DA and Baldwin A (2001). X-by-wire technology. Total vehicle technology: Challenging current thinking, pp 3-12.

[20] Sanders DA, Urwin-Wright SD, Tewkesbury GE, et al. (2005). Pointer device for thin-film transistor and cathode ray tube computer screens. Electronics Letters 41 (16), pp 894-896.

[21] Bergasa-Suso J, Sanders DA, Tewkesbury GE (2005). Intelligent browser-based systems to assist Internet users. IEEE Transactions 48 (4), pp 580-585.

[22] Chester, S; Tewkesbury, G; Sanders, D, et al. (2006). New electronic multi-media assessment system. WEBIST 2006: Proceedings of the Second International Conference on Web Information Systems and Technologies, pp: 320-324.

[23] Stott I, Sanders D (2000). New powered wheelchair systems for the rehabilitation of some severely disabled users. Int Jnl of rehabilitation research 23 (3), pp 149-153.

[24] Sanders DA, Langner M and Tewkesbury GE (2010). Improving wheelchair-driving using a sensor system to control wheelchair-veer and variable-switches as an alternative to digital-switches or joysticks. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, Vol 37 (2), pp: 157-167.

[25] Nadakatti, M; Ramachandra, A; Kumar ANS (2008). Artificial intelligence-based condition monitoring for plant maintenance. Assembly Automation 28 (2), pp 143-150.

[26] Sanders DA, Lambert G and Pevy L (2009). Pre-locating corners in images in order to improve the extraction of Fourier descriptors and subsequent recognition of shipbuilding parts, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol 223, Iss: 9, pp: 1217-1223.

[27] Bullinaria, JA; Li, XL (2007). An introduction to computational intelligence techniques for robot control. Industrial robot – an international journal 34 (4), pp 295-302.

[28] Tewkesbury G and Sanders D (1999). A new robot command library which includes simulation. Industrial Robot: An International Journal 26 (1), pp 39-48.

[29] Lopatin C and Mahmood S (2006). AI techniques for health monitoring: Application to embedded sensors in solid rocket motors. Editor: Guemes A. Proceedings of the 3rd European Workshop on Structural Health Monitoring (Granada, Spain – July 06), pp: 1125-1132

[30] Morales-Menendez R; Vallejo A; Garza Luis E.; et al. (2007). AI approaches for cutting tool diagnosis in machining processes. Editor: Devedzic V. Proceedings of the IASTED International Conference on Artificial Intelligence and Applications (Innsbruck, Austria – February 07), pp: 186-191.

[31] Sanders D (2007). Viewpoint - Force sensing. Industrial Robot: An International Journal 34 (4), pp 268-268.

[32] Guru SM, Fernando S, Halgamuge S and Chan K (2004). Intelligent fastening with A-BOLT technology and sensor networks. Assembly Automation 24 (4), pp 386-393.

[33] Sanders (2008c). Controlling the direction of “walkie” type forklifts and pallet jacks on sloping ground. Assembly Automation 28 (4), pp 317–324.

[34] Sanders DA (2010). Comparing speed to complete progressively more difficult mobile robot paths between human tele-operators and humans with sensor systems to assist, SENSOR REVIEW, Vol: 30, Iss: 1, pp: 40-50.

[35] Michalski RS (1990), A theory and methodology of inductive learning, in Shavlik JW and Dietterich TG (Eds.), Kaufmann, Readings in Machine Learning, San Mateo, CA, pp. 70–95.

[36] Muggleton S (Ed.) (1992), Inductive Logic Programming. Academic Press, London, 1992. 565 p.

[37] Kolonder JL (1994) Case-based reasoning. Morgan Kaufmann.

[38] Garcia-Crespo Angel; Ruiz-Mezcua Belen; Luis Lopez-Cuadrado Jose; et al. (2011). A review of conventional and knowledge based systems for machining price quotation. Journal of intelligent manufacturing Vol 22 (6), pp: 823-841.

[39] Ma Q. C.; Liu X. W. (Editor(s): Cheng K; Yao YX; Zhou L) (2008). Review of knowledge based engineering with PLM. Proceedings of the 6th International Conference on e-Engineering and Digital Enterprise Technology (Harbin – China 07), E-Engineering and digital enterprise technology. Book Series: Applied Mechanics and materials 10-12, pp: 127-131.

[40] Ashiru I, Czanecki C and Routen T (1995). Intelligent operators and optimal genetic-based path planning for mobile robots. Proceedings of the International Conference on Recent Advances in Mechatronics, Istanbul, Turkey (August 95) pp: 1018–1023.

[41] Wang L, Tian Y and Sawaragi T (2011). Case-based automatic programming in robotic assembly production. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, Vol 38 (1), pp: 86-96.

[42] Hossain A, Rahman A and Mohiuddin AKM (2011). Fuzzy expert system for controlling swamp terrain intelligent air-cushion tracked vehicle. Int Journal of automotive technology 12 (5), pp: 745-753.

[43] Wu YH and Shaw HJ (2011). Document based knowledge base engineering method for ship basic design. OCEAN ENGINEERING Vol 38 (13), pp: 1508-1521.

[44] Gamez Garcia J, Gomez Ortega J. Satorres Martinez S et al. (2011). Expert system based controller for the high-accuracy automatic assembly of vehicle headlamps. Expert systems with applications 38 (10), pp: 12818-12825.

[45] Mawussi KB and Tapie L (2011). A knowledge base model for complex forging die machining. COMPUTERS & INDUSTRIAL ENGINEERING, Vol 61 (1), pp: 84-97.

[46] Peers SMC, Tang MX and Dharmavasan S (1994). A knowledge-based scheduling system for offshore structure inspection, in G. Rzevski, R.A. Adey, D.W. Russell (Eds.), Artificial Intelligence in Assembly Automation IX (AIEng 9), Computational Mechanics, Southampton. pp: 181-188.

[47] May GA, Lanoue MA, Bethel M et al. (2011). Expert system for controlling plant growth in a contained environment. Patent Number: US 07987632. Patent Assignee: The Institute for Technology Development. Official Gazette of the United States Patent and Trademark Office Patents (August 2011).

[48] Armero C, Artacho A, Lopez-Quilez A et al. (2011). A probabilistic expert system for predicting the risk of Legionella in evaporative installations. Expert systems with applications 38 (6), pp: 6637-6643.

[49] Garcia-Crespo A, Ruiz-Mezcua B and Luis Lopez-Cuadrado J et al. (2011). A review of conventional and knowledge based systems for machining price quotation. JOURNAL OF INTELLIGENT MANUFACTURING Vol 22 (6), pp: 823-841.

[50] L.A. Zadeh, Fuzzy sets. Inf. Control 8 (1965), pp: 338-353.

[51] F. Lara Rosano, N. Kemper Valverde, C. De La Paz Alva, J. Alcántara Zavala, Tutorial expert system for the design of energy cogeneration plants, Proceedings of the Third World Congress on Expert Systems, Seoul, Korea, February, 1996. Pp: 300-305.

[52] H.-J. Zimmermann, Fuzzy Set Theory and its Applications, 2nd Edn. Kluwer, Boston. 1991.

[53] Azadegan Arash; Porobic Lejla; Ghazinoory Sepehr; et al. (2011). Fuzzy logic in manufacturing: A review of literature and a specialized application. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, Vol 132 (2), pp: 258-270.

[54] Liu D (20110. Fuzzy Logic and Computational Intelligence. IEEE INTELLIGENT SYSTEMS, Vol 26 (4), pp: 11-11.

[55] Chen B and Chen SB (2010). Multi-sensor information fusion in pulsed GTAW based on fuzzy measure and fuzzy integral Author(s): Source: ASSEMBLY AUTOMATION Vol: 30 .: 3 Pages: 276-285 DOI: 10.1108/01445151011061172 Published: 2010

[56] Cheng Y, Fan Y and Huang M (2012). Innovative intelligent navigation system by applying fuzzy logic and cell assemblies in rescuing robot. Applied artificial intelligence 26 (3), pp: 183-203.

[57] Jeguirim Selsabil El-Ghezal; Dhouib Amal Babay; Sahnoun Mahdi; et al. (2011). The use of fuzzy logic and neural networks models for sensory properties prediction from process and structure parameters of knitted fabrics. JOURNAL OF INTELLIGENT MANUFACTURING, Vol 22, Iss: 6, pp: 873-884.

[58] Ni J and Yang SX (2012). A fuzzy-logic based chaos GA for cooperative foraging of multi-robots in unknown environments. Int Journal of robotics and automation 27 (1), pp: 15-30.

[59] Devos GGM and Ribeiro CLC (2011). A fuzzy logic approach to supply chain performance management. INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, Vol 134, Iss: 1, pp: 177-187.

[60] Azadegan Arash; Porobic Lejla; Ghazinoory Sepehr; et a (2011). Fuzzy logic in manufacturing: A review of literature and a specialized application. Int Journal of production economics, Vol 132, Iss: 2, pp: 258-270.

[61] J.R. Quinlan, Learning efficient classification procedures and their applications to chess end games, in R.S. Michalski, J.G. Carbonell, T.M. Mitchell (Eds.), Machine Learning, An Artificial Intelligence Approach, Morgan Kaufmann, Palo Alto, CA, 1983. pp: 463-482.

[62] L.X. Wang and M. Mendel, Generating fuzzy rules by learning from examples. IEEE Trans. Syst., Man Cybernet. 22 (1992), pp. 1414-1427.

[63] Robinet V, Lemaire B and Gordon MB (2011). MDLChunker: A MDL-Based Cognitive Model of Inductive Learning . COGNITIVE SCIENCE Vol: 35 .: 7 Pages: 1352-1389.

[64] Schmid U and Kitzelmann E (2011). Inductive rule learning on the knowledge level. COGNITIVE SYSTEMS RESEARCH , Vol 12, Iss: 3-4, pp: 237-248.

[65] Piramuthu S and Sikora RT (2009). Iterative feature construction for improving inductive learning algorithms. EXPERT SYSTEMS WITH APPLICATIONS, Vol 36, Iss: 2, pp: 3401-3406.

[66] D. Luzeaux, Process control and machine learning: rule-based incremental control. IEEE Transiblic Autom. Control 39 (1994), pp: 1166-1171.

[67] Kercel SW and Dress WB (1997). Inductive learning as a fusion engine for mine detection. Book Series: Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics - Computational Cybernetics and Simulation (SMC 97 = Orlando FL), Volumes 1-5, pp: 4133-4138.

[68] Nakasuka S, Yairi T and Wajima H (1997). Autonomous generation of reflexion-based robot controller using inductive learning. Robotics and autonomous systems 17 (4), pp: 287-305.

[69] D.T. Pham, X. Liu, Neural Networks for Identification, Prediction and Control, Springer Verlag, London, Berlin and Heidelberg, Third printing, 1997. 238 pp.

[70] Paliwal Mukta; Kumar Usha A (2009). Neural networks and statistical techniques: A review of applications. EXPERT SYSTEMS WITH APPLICATIONS, Vol 36, Iss: 1, pp: 2-17.

[71] Bae JK and Jinhwa K (2011). Combining models from neural networks and inductive learning algorithms. EXPERT SYSTEMS WITH APPLICATIONS, Vol 38, Iss: 5, pp: 4839-4850.

[72] Ontman AYM and Shiflet GJ (2011). Application of artificial neural networks for feature recognition in image registration. Journal of microscopy 246 (1), pp: 20-32.

[73] Naranjo Jose E, Jimenez Felipe, Serradilla Francisco J et al. (2012). Floating Car Data Augmentation Based on Infrastructure Sensors and Neural Networks. IEEE Transactions on intelligent transportation systems 1, pp: 107-114.

[74] Matsushima Michiya; Kawai Naohiro; Fujie Hiroyuki; et al. (Editors: Shirase K and Aoyagi S) (2010). Visual Inspection of Soldering Joints by Neural Network with Multi-angle View and Principal Component Analysis. Service robots and mechatronics, pp: 329-334.

[75] Ferreiro GR (2012). Improving heat exchanger supervision using neural networks and rule based techniques. Expert systems with applications 39 (3), pp: 3012-3021.

[76] Ohka M, Esumi K and Sawamoto Y (2012). Two-Axial Piezoelectric Actuator Controller Using a Multi-Layer Artificial Neural Network Featuring Feedback Connection for Tactile Displays. Advanced robotics 26 (1-2), pp: 219-232.

[77] Hamedi M.; Shariatpanahi M.; Mansourzadeh A (2007). Optimizing spot welding parameters in a sheet metal assembly by neural networks and genetic algorithm. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE Vol: 221 .: 7 Pages: 1175-1184.

[78] P. Smith, J. MacIntyre, S. Husein, The application of neural networks in the power industry, Proceedings of the Third World Congress on Expert Systems, Seoul, Korea, February, 1996. pp: 321–326.

[79] J.H. Holland, Adaptation in Natural and Artificial Systems. The University of Michigan Press, Ann Arbor, MI. 1975.

[80] L. Davis, Handbook of Genetic Algorithms. Van Nostrand, New York, NY. 1991.

[81] Akgunduz Onur Serkan; Tunali Semra (2011). A review of the current applications of genetic algorithms in mixed-model assembly line sequencing. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH Vol: 49 .: 15 Pages: 4483-4503.

[82] Raj M. Victor; Sankar S. Saravana; Ponnambalam S. G. (2011). Genetic algorithm to optimize manufacturing system efficiency in batch selective assembly. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol 57, Iss: 5-8, pp: 795-810.

[83] Wu Q (2011). Car assembly line fault diagnosis model based on triangular fuzzy Gaussian wavelet kernel support vector classifier machine and genetic algorithm. EXPERT SYSTEMS WITH APPLICATIONS, Vol 38, Iss: 12, pp: 14812-14818.

[84] Zhao WZ and Wang CY (2012). Mixed H-2/H-a road feel control of EPS based on genetic algorithm. Science China-Technological Sciences 55 (1), pp: 72-80.

[85] Yu Jianfeng; Yin Yuehong (2010). Assembly line balancing based on an adaptive genetic algorithm. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol 48, Iss: 1-4, pp: 347-354.

[86] Zhang XL; Liang D, Zeng J et al. (2012). Genetic algorithm-support vector regression for high reliability SHM system based on FBG sensor network. Optics and lasers in engineering 50 (2), pp: 148-153.

[87] Stokic Dragan; Neves-Silva Rui; Marques Maria; et al. (2007). Ambient intelligence based system for life-cycle management of complex manufacturing and assembly lines. 5th IEEE International Conference on Industrial Informatics Location: Vienna, Austria (JUN 23-27, 2007). pp: 945-950.

[88] DA Sanders, H Liu, DJ Harrison and A Gegov (2008). Energy efficiency based on ambient intelligence. Journal of computing in systems and engineering, Vol 9 (1), pp: 114-120.

[89] Sanders D, Tewkesbury G and Graham-Jones J (2011). Simple rules to modify pre-planned paths and improve gross robot motions associated with pick & place assembly tasks. ASSEMBLY AUTOMATION, Vol 31, Iss: 1, pp: 69-78.

[90] Urwin-Wright S, Sanders D, Chen S (2003). Predicting terrain contours using a feed-forward neural network. Engineering Applications of Artificial Intelligence 16 (5-6), pp: 465-472.

[91] Sanders D, Tewkesbury G, Stott I et al. (2011). Simple expert systems to improve an ultrasonic sensor-system for a tele-operated mobile-robot SENSOR REVIEW, Vol 31, Iss: 3, pp: 246-260.

[92] Sanders D (2010). Comparing ability to complete simple tele-operated rescue or maintenance mobile-robot tasks with and without a sensor system. SENSOR REVIEW, Vol 30, Iss: 1, pp: 40-50.

[93] Sanders, DA; Graham-Jones, J; Gegov, A (2010). Improving ability of tele-operators to complete progressively more difficult mobile robot paths using simple expert systems and ultrasonic sensors. INDUSTRIAL ROBOT-AN INTERNATIONAL JOURNAL, Vol 37, Iss: 5, pp: 431-440.

[94] Sanders, D; Tan, YC; Rogers, I, et al. (2009). An expert system for automatic design-for-assembly. ASSEMBLY AUTOMATION, Vol 29, Iss: 4, pp: 378-388.

[95] Hudson, AD; Sanders, DA; Tewkesbury, GE, et al. (1996). Simulation of a high recirculation airlift reactor for steady-state operation. WATER SCIENCE AND TECHNOLOGY, Vol 34, Iss: 5-6, pp: 59-66.

[96] Sanders, DA; Lambert, G; Graham-Jones, J, et al. A robotic welding system using image processing techniques and a CAD model to provide information to a multi-intelligent decision module. ASSEMBLY AUTOMATION, Vol 30, . 4, pp: 323-332.

[97] Sanders (2008). Environmental sensors and networks of sensors. Sensor Review 28 (4), pp: 273 – 274.

[98] Riva G, Vatalaro F, Davide F & Alcañiz M (Eds) (2005). Ambient Intelligence in Practice: Future Perspectives and Applications. IOS Press, pp: 237-264.

[99] Brooks M (2000). Whatever you want. New Scientist Magazine September. Number 2258. 

<< First < Previous 1 2 3 4 5 Next > Last >>

No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
IIoT grows up; Six ways to lower IIoT costs; Six mobile safety strategies; 2017 Salary Survey
2016 Top Plant; 2016 Best Practices on manufacturing progress, efficiency, safety
2016 Product of the Year; Diagnose bearing failures; Asset performance management; Testing dust collector performance measures
Future of oil and gas projects; Reservoir models; The importance of SCADA to oil and gas
Big Data and bigger solutions; Tablet technologies; SCADA developments
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
What controller fits your application; Permanent magnet motors; Chemical manufacturer tames alarm management; Taking steps in a new direction
Tying a microgrid to the smart grid; Paralleling generator systems; Previewing NEC 2017 changes
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
Motion control advances and solutions can help with machine control, automated control on assembly lines, integration of robotics and automation, and machine safety.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on preventing compressed air leaks and centrifugal air compressor basics and best practices for the "fifth utility" in manufacturing plants.
Maintenance Manager; California Oils Corp.
Associate, Electrical Engineering; Wood Harbinger
Control Systems Engineer; Robert Bosch Corp.
click me