Application Update: What’s the cost, ROI, of a robotic cell?

Thinking of robotics? Here are the metrics needed to make a smart return-on-investment decision about a robot purchase.

11/25/2010


In rough numbers, what does a robot cell cost?  What’s the total cost of ownership?  How do you justify it?  What’s the return on investment (ROI)?  What’s the internal rate of return (IRR)?

Here are some rules of thumb. Companies automate for a combination of the following three reasons, to:

1.  Save money. Labor savings is the most obvious reason.  Labor costs range greatly depending on the industry, geography, if it’s a unionized environment, and other factors.

Typically, labor costs per operator range from a low-end of $20,000 per year to a high-end of $80,000 (all-in costs including wages and benefits).  Besides direct labor savings, other benefits of automating often include improved quality reduced scrap, and less rework. These costs are often tougher to quantify but can play a big role in certain applications.

2. Make more money. Existing production equipment is either starved or bottle-necked because people aren’t fast enough to load or unload it.  In some cases, a manufacturer could sell more product with the capacity to make it.  By using robotics, you can operate faster.  This increase in throughput (and revenue) comes at a low cost in relation to new production equipment.  In other instances, manufacturers are outsourcing the overflow production to meet demands.  By automating the loading and unloading, they reduce or eliminate the need to outsource. (See reason number 1.)

3. Comply with government, regulations, laws, or requirements. In most cases these are ergonomic issues—stresses and strains from high-speed, repetitive tasks or lifting of heavy objects.  They result in workers’ compensation claims, lost time injuries, added rotations through strenuous jobs, etc.  Usually ergonomics doesn’t make or break the business decision to automate, but it can be an important factor.  From my experience, ergonomic costs can range from 5% to 20% of the direct labor costs.

Other times, the risks are more serious than stresses or strains.  Sometimes, the sole motivation is to get people out of hazardous jobs.  A robot is a lot easier to replace than a human life.

What does a robot cell cost?

A typical, single robot cell is $300,000, plus or minus 50%.  Obviously, this is an order of magnitude estimate and will vary depending on the complexity of the process, but generally most single-robot systems will fall into this cost range.

This will include:

  • Mid-sized robot
  • Robot end-of-arm-tooling or gripper
  • Control panel including PLC, operator interface screen (HMI), safety circuits, motor starters, and the like
  • Cell guarding
  • Customized engineering for the system to complete the desired process
  • Some auxiliary equipment, such as conveyors or deburring equipment
  • Fabrication, assembly, setup, and runoff at the system integrator’s facility
  • Shipping to the site
  • Rigging and installation
  • Integration with your existing equipment, and
  • System-specific operator and maintenance training.

 What about ongoing costs?

Description

 

Cost

 

Frequency

 

Initial spare parts

 

$5000 to $20,000

 

One-time purchase with system

 

Yearly service and maintenance

 

$2k to $5k

 

Yearly

 

Yearly replacement and wear items

 

$2k to $5k

 

Yearly

 

Typical costs outside of the main purchase will include spare parts, yearly service, and maintenance, including yearly replacement and wear items.

Return on investment?

Any ROI between 12 months and 36 months is a no-brainer. At a minimum, if you have more than two shifts of operation and all-in labor costs of $35,000 per person, there’s a strong business case to look at automation.


Ken McLaughlin is director, automation systems with JMP Engineering Inc., www.jmpeng.com, London, Ontario, Canada. McLaughlin among the class of 2010 Control Engineering Leaders Under 40. He writes a blog called Robot Shift at http://robotshift.com.


- Edited by Mark T. Hoske, Control Engineering content manager, www.controleng.com.



No comments
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
World-class maintenance: The three keys to success - Deploy people, process and technology; 2016 Lubrication Guide; Why hydraulic systems get hot
Flexible offshore fire protection; Big Data's impact on operations; Bridging the skills gap; Identifying security risks
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Getting to the bottom of subsea repairs: Older pipelines need more attention, and operators need a repair strategy; OTC preview; Offshore production difficult - and crucial
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role that compressed air plays in manufacturing plants.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me