Advice for selecting a non-contact infrared temperature sensor

Solutions Direct and Raytek offer guidelines for analyzing your application in light of available solutions.


The human eye is unable to detect infrared radiation; however an IR detector (a.k.a. pyrometer) converts the infrared energy into an electrical signal that generates a temperature value.All objects constantly emit infrared (IR) radiation. Infrared radiation occupies the region of the electromagnetic spectrum between visible light and microwaves. As an object becomes hotter, the frequency of the vibrations increases and the total amount of infrared energy increases significantly. The human eye is unable to detect infrared radiation; however an IR detector (a.k.a. pyrometer) converts the infrared energy into an electrical signal that generates a temperature value. Infrared or non-contact temperature sensors are very successful in measuring hot, moving, or difficult to reach objects. They are also used where conventional contact temperature sensors would damage or alter the material.

Infrared has been used successfully in a wide range of industrial applications including: heat treating, forging, glass processing, building and construction materials, packaging, thermoforming, machine condition monitoring, and food processing. Solutions Direct has put together some basic questions to help customers choose the correct fixed mount pyrometer:

• What is the temperature range to be measured as well as accuracy required?
• What is the target material? Is it shiny or dull? Highly reflective or shiny materials tend to have a low emissivity (object’s ability to emit energy) while non-metallic or organic materials have a higher emissivity. Solutions Direct has compiled an emissivity table by material type.
• What is the distance from the sensor and target size? Optical resolution is specified by the D:S ratio, which is found by comparing the distance from the object to the sensor (D) with the size (e.g., diameter) of the spot being measured (S). For example, a 1" spot on a target being measured at a distance of 10" has a D:S of 10:1.
• How much of the device’s field of view does the target fill? The more, the better.
• What are the ambient/environmental conditions? What is the ambient temp? Is there smoke, dust, or particulates? These can affect accuracy and repeatability.
• Are the parts moving (e.g., rollers, moving machinery, or conveyor belts)? If so, how fast? This influences response time requirements.
• What signal input does your controller accept? Possibilities include 4-20 mA, J or K thermocouple, or RS-485.

Solutions Direct distributes Raytek's line of fixed mount infrared thermometers for OEM’s and industrial applications ranging from -40 to 1,800 °C (-40 to 3,272 °F). These sensors are economical, easy-to-install, and integrate easily into existing process control systems. They come in a variety of temperature ranges, optical resolutions, response times, outputs, and spectral responses/wavelengths. Accessories for cooling and air purging are also available. If you have any questions or need assistance in choosing an infrared sensor for your application, please contact us.

Solutions Direct Online

Edited by Peter Welander,

Anonymous , 03/22/13 12:25 AM:

nice sensor
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2013 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
A cool solution: Collaboration, chemistry leads to foundry coat product development; See the 2015 Product of the Year Finalists
Raising the standard: What's new with NFPA 70E; A global view of manufacturing; Maintenance data; Fit bearings properly
Sister act: Building on their father's legacy, a new generation moves Bales Metal Surface Solutions forward; Meet the 2015 Engineering Leaders Under 40
Cyber security cost-efficient for industrial control systems; Extracting full value from operational data; Managing cyber security risks
Drilling for Big Data: Managing the flow of information; Big data drilldown series: Challenge and opportunity; OT to IT: Creating a circle of improvement; Industry loses best workers, again
Pipeline vulnerabilities? Securing hydrocarbon transit; Predictive analytics hit the mainstream; Dirty pipelines decrease flow, production—pig your line; Ensuring pipeline physical and cyber security
Upgrading secondary control systems; Keeping enclosures conditioned; Diagnostics increase equipment uptime; Mechatronics simplifies machine design
Designing positive-energy buildings; Ensuring power quality; Complying with NFPA 110; Minimizing arc flash hazards
Building high availability into industrial computers; Of key metrics and myth busting; The truth about five common VFD myths

Annual Salary Survey

After almost a decade of uncertainty, the confidence of plant floor managers is soaring. Even with a number of challenges and while implementing new technologies, there is a renewed sense of optimism among plant managers about their business and their future.

The respondents to the 2014 Plant Engineering Salary Survey come from throughout the U.S. and serve a variety of industries, but they are uniform in their optimism about manufacturing. This year’s survey found 79% consider manufacturing a secure career. That’s up from 75% in 2013 and significantly higher than the 63% figure when Plant Engineering first started asking that question a decade ago.

Read more: 2014 Salary Survey: Confidence rises amid the challenges

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.