A video game platform as your next process controller?

While some say current HMIs look like video games, is it practical to run a process unit using an obsolete Xbox as a controller? One supplier says it’s possible and even economical. Get your gaming thumbs back in shape.


Get your gaming fingers back in shape. New system turns old Xbox into a DCS.That obsolete Xbox in the basement may have a new future as a DCS. While that may sound farfetched, one engineer has turned a 10-year-old game console into a process controller and is running a small batch chemical manufacturing unit using traditional gaming controllers. This project is another from industrial hacker Carl Landwiener who created a system several years ago that allowed field instruments to communicate wirelessly using old cellular phones.

“The original Xbox was essentially a Windows machine since it was produced by Microsoft,” Landwiener explains. “There’s really a lot of sophisticated processing power in there, so all it requires is a little reprogramming and a way to connect the I/O. They really aren’t all that hard to find as electronic junk, so they represent one of the great hardware bargains.”

Given that many people who are now in their 20s or 30s cut their video gaming teeth on just such a platform, picking up a traditional “controller S,” (see photo) will seem very familiar and maybe even a bit nostalgic. Landwiener’s first installation uses the first generation version of Halo as its main platform, although it’s difficult to see that in the graphics. The controller functions are much the same, so operators will find that changing valve positions will be much like defending against an enemy attack.

The original An interesting approach, to be sure, but even Landwiener admits it has its limitations. “At the moment, this system can only handle 48 tags, so it needs to be a pretty small process. There’s also a lot of manual code writing that has to happen to finish off the HMIs. It took me a while to get the control valves to stop looking like ‘grunts,’ but that’s pretty well under control now. There are some situations where shooting at a valve can open it when you really want it to close, so users really need to pay attention. That really adds some action that should keep operators engaged.”

<< First < Previous 1 2 Next > Last >>

kazuhiro , Non-US/Not Applicable, Japan, 04/02/13 10:06 PM:

Anonymous , 04/03/13 06:06 AM:

Haha.... however, Cognex has used a gaming controller years ago to run one of there processers.
Jim , CA, United States, 04/10/13 10:47 AM:

I like it. I hope you keep this type of thing going, very enjoyable. I thought last years version of the april fools prank was better though.
Jim , CA, United States, 04/10/13 11:09 AM:

Very enjoyable, keep it up !
The Top Plant program honors outstanding manufacturing facilities in North America. View the 2015 Top Plant.
The Product of the Year program recognizes products newly released in the manufacturing industries.
The Engineering Leaders Under 40 program identifies and gives recognition to young engineers who...
Safety for 18 years, warehouse maintenance tips, Ethernet and the IIoT, GAMS 2016 recap
2016 Engineering Leaders Under 40; Future vision: Where is manufacturing headed?; Electrical distribution, redefined
Strategic outsourcing delivers efficiency; Sleeve bearing clearance; Causes of water hammer; Improve air quality; Maintenance safety; GAMS preview
SCADA at the junction, Managing risk through maintenance, Moving at the speed of data
Safety at every angle, Big Data's impact on operations, bridging the skills gap
The digital oilfield: Utilizing Big Data can yield big savings; Virtualization a real solution; Tracking SIS performance
Applying network redundancy; Overcoming loop tuning challenges; PID control and networks
Driving motor efficiency; Preventing arc flash in mission critical facilities; Integrating alternative power and existing electrical systems
Package boilers; Natural gas infrared heating; Thermal treasure; Standby generation; Natural gas supports green efforts

Annual Salary Survey

Before the calendar turned, 2016 already had the makings of a pivotal year for manufacturing, and for the world.

There were the big events for the year, including the United States as Partner Country at Hannover Messe in April and the 2016 International Manufacturing Technology Show in Chicago in September. There's also the matter of the U.S. presidential elections in November, which promise to shape policy in manufacturing for years to come.

But the year started with global economic turmoil, as a slowdown in Chinese manufacturing triggered a worldwide stock hiccup that sent values plummeting. The continued plunge in world oil prices has resulted in a slowdown in exploration and, by extension, the manufacture of exploration equipment.

Read more: 2015 Salary Survey

Maintenance and reliability tips and best practices from the maintenance and reliability coaches at Allied Reliability Group.
The One Voice for Manufacturing blog reports on federal public policy issues impacting the manufacturing sector. One Voice is a joint effort by the National Tooling and Machining...
The Society for Maintenance and Reliability Professionals an organization devoted...
Join this ongoing discussion of machine guarding topics, including solutions assessments, regulatory compliance, gap analysis...
IMS Research, recently acquired by IHS Inc., is a leading independent supplier of market research and consultancy to the global electronics industry.
Maintenance is not optional in manufacturing. It’s a profit center, driving productivity and uptime while reducing overall repair costs.
The Lachance on CMMS blog is about current maintenance topics. Blogger Paul Lachance is president and chief technology officer for Smartware Group.
This article collection contains several articles on the vital role of plant safety and offers advice on best practices.
This article collection contains several articles on the Industrial Internet of Things (IIoT) and how it is transforming manufacturing.
This article collection contains several articles on strategic maintenance and understanding all the parts of your plant.
click me